Dresser runner – You can take two approaches to adding runners to an old comfortable you can use wood or metal runners. If the wardrobe is old or vintage and already has wooden corridors, you may want to continue with the wood to maintain the integrity of the structure. However, wood slides can get fickle and it is known to require a bit of shifting getting the drawers to open and close. Metal sliders, it will be easier to slide the drawers and exit without so much fuss.
Remove the drawers from the dresser runner. Identify if the wooden or metal drawers had corridors. Look at the interior walls of the dresser to determine the condition of existing wood or metal corridors. Loosen the metal rail fixing screws and remove them. Use a hacksaw and carefully saw distance non-working wood runners that you want to replace. Take a file to remove small pieces of wood. Sand until the surface is flat and smooth. Repeat this process to eliminate the lanes in the drawers.
Mark the start and end of the dresser runner inside the closet and on the sides of each drawer with a carpenter’s pencil. Use the brands to position the new brokers. Pieces of wood purchase to install the wooden runners, or slides of the metal drawer.
12 Ideas To Add Dresser Runner Photos